| ● Standard ○ Optional - Not Included | ||||||||||
|
Material |
EPO foam & ABS Plastic | |||||||||
| Wingspan | 1236mm / 48.6" | |||||||||
| Length | 1300mm / 51.2" | |||||||||
| Take off weight | 2185g / 77oz （w/o battery） | |||||||||
| Top Speed | 190KPH / 120MPH | |||||||||
| EDF / Propeller | 80mm 12-Blade ducted fan (V2,2023) | |||||||||
| Motor | 3658-2150KV Inrunner Brushless Motor | |||||||||
| ESC | 100A / 7A BEC with EC5 Connector (Thrust reversing ESC) | |||||||||
| Servos |
Digital metal gear servo 9g ╳ 8pcs |
|||||||||
| Landing Gear |
Electronic retractable landing gear with metal shock absorbing struts |
|||||||||
| Cabin door | Front door, Main Landing gear door | |||||||||
| LED lights | Formation lights ╳ 4pcs | |||||||||
| Spcial accessories | Multi-Function Control board | |||||||||
| Ailerons | ● | |||||||||
| Elevator | ● | |||||||||
| Rudder | ● | |||||||||
| Flap | ● | |||||||||
| Canards | - | |||||||||
| 3DTV Nozzle Set | - | |||||||||
| After-burner | ○ | |||||||||
| ● Standard ○ Optional - Not Included | |||||||||
| Models | EDF Fan | Motors | ESC | Servos | Landing gear | Cabin door | Led lights |
Multi-Function Control board |
Gyro |
| PNP | ● | ● | ● | ● | ● | ● | ● | ● | - |
| ARF Plus | - | - | - | ● | ● | ● | ● | ● | - |
Skill Level Advanced
Required Radio 6+ Channe
Required Battery 6S 22.2V 4000~6000mAh LiPo EC5 Connector
Assembly Way Fixed by screw
Build Time About 1 hours
|
Avanit S V2 New color scheme The new red and grey color scheme, looks very eye-catching in the air, and the medium gray color is not easily affected by sunlight to cause blistering problems. |
|
|
|
Cabin door The redesigned nose cabin door enhances practicality and aesthetics. Also, the extend and enlarge the outer frame of the cabin door can protect the raised foam at the bottom. |
|
|
|
Cabin door Control Avanti V2 used the double-sided spring compression type control structure of the cabin door. It results in higher structural reliability. |
|
|
|
Nose landing gear Compared to the old version, the Avanti V2 has reduced the total height of the front landing gear. The landing gear piston rod is thickened, and the torque arm fixing parts and the main support rod are processed and formed as one, eliminated the assembly structure. Add linear bearings to improve shock absorption effect. |
|
|
|
Main landing gear The thickness of the main landing gear shock absorber arm has been increased from 3mm to 4mm, improved the strength of the landing gear. |
|
|
|
Power system Upgraded to the new 12 blade EDF with new in-runner motor and the 100A ESC with thrust reverse function. The thrust is stronger, and the level flight speed has been increased from 165KPH to 180KPH. A plastic cover has been added to the protruding part of the power compartment cover for protection. |
|
|
|
Elevator plastic hinge Added a new plastic hinge in the elevator of Avanti V2, it prevent the elevator surface from tearing from here. |
|
|
|
Center of gravity There is a CG marking line of the lower main wing for easy confirmation of the center of gravity. |
|
|
|
LED navigation lights Avanti V2 has four pcs LED navigation lights, its flashing frequency is controlled by the control board. |
|
|
|
Main wing structure Use the ribbon wires and screws to connect the main wing and fuselage, making it very easy to store and transport. |
|
|
|
Battery compartment Avanti V2 have a big battery compartment, it can use the 6S 4500~6000mAh lipo battery to fly. |
|
|
For product purchase, use, repair and maintenance issues, you can contact us here
+: 86 769 82 669 669
Mon.~ Fri.(UTC+8)8:30-17:30
