● Standard ○ Optional - Not Included | ||||||||||
Material |
EPO foam & ABS Plastic | |||||||||
Wingspan | 1050mm / 41.3" | |||||||||
Length | 1436mm / 56.5" | |||||||||
Take off weight | 2420g / 85.3oz (w/o battery) | |||||||||
Top Speed | 219KPH / 136.5MPH (w/o missiles) | |||||||||
EDF / Propeller | 80mm 12-Blade ducted fan (V2,2023) | |||||||||
Motor | 3658-2150KV Inrunner Brushless Motor | |||||||||
ESC | 100A / 7A BEC with EC5 Connector (Thrust reversing ESC) | |||||||||
Servos |
Digital Hybrid gear servo 9g ╳ 10pcs |
|||||||||
Landing Gear |
Electronic retractable landing gear with metal shock absorbing struts (Gray color) |
|||||||||
Cabin door | Front door, Main Landing gear door | |||||||||
LED lights | Formation lights ╳ 6pcs | |||||||||
Spcial accessories | E52 Gyro, Multi-Function Control board | |||||||||
Ailerons | ● | |||||||||
Elevator | ● | |||||||||
Rudder | ● | |||||||||
Flap | ● | |||||||||
Canards | - | |||||||||
3DTV Nozzle Set | - | |||||||||
After-burner | ○ | |||||||||
Video link |
- |
● Standard ○ Optional - Not Included | |||||||||
Models | EDF Fan | Motors | ESC | Servos | Landing gear | Cabin door | Led lights |
Multi-Function Control board |
Gyro |
PNP | ● | ● | ● | ● | ● | ● | ● | ● | ● |
ARF Plus | - | - | - | ● | ● | ● | ● | ● | - |
Videos |
|
Skill lever Intermediate
Receiver requirment 8CH Receiver
6S 22.2V 4500~5200mAh >35C
Tail wing fixed by Screws Main wing without screws
Build Time Less than 0.5 hour
Scale Elements- Missiles and Drop tanks F9F-8 include 4pcs scale missiles and 2pcs scale drop tanks. Mount them by magnetic suction/guide rail. |
High scale metal shock absorber landing gear Alu alloy CNC processing, it includes front and rear shock absorbing landing gears with linear bearings, decorated with coloring and plastic parts. It improved the overall scale level of the aircraft. |
Complete landing gear doors The Freewing F9F-8 has a complete landing gear door that simulates its real jet operation. |
QUICK-Install screwless assemble/disassemble Freewing F9F-8 used the "QUICK-Install ”screwless structure components, it can quick assemble/disassemble the main wing without any screws or glue. |
LED navigation light system It pre-installed with 6 LED lights. You can also configure your preferred lighting method by changing the control box connection interface. |
New 2023 80mm high-performance EDF power system The new 80mm EDF 12 blade plastic power system provides strong power for the F9F-8. Maximum apparent velocity value: 220KM/H (Subduction slope<40 degree) |
Pre-installed Gyro F9F-8 PNP Version pre-installed the E52 gyro. It has set the stabilization parameter values and can fly without additional settings. Under weather of level 3 Note: Please confirm that the E52 gyro is in the correct operating mode - indicator light: red always on |
Battery and battery compartment Large battery compartment allows for easy placement of a 6S 5000mAh~6000mAh Li-po battery. |
Important logo with considerate design The lower surface of the main wing is marked with the mark of center of gravity; On the side of the nose, there is a reference line for the canard centering position. Get the right and important information anytime, anywhere. |
Different nose cone set Different F9F, different nose cone. We provide different nose cone for your choose: UHF horning antenna *1, Probes for inflight refueling*1, nose cone component *1 |
Tail wing connection board New tail wing connection board make the connection of the tail wing cables more convenient. The connection reliability of quadrilateral solid row needles is much higher than traditional male female direct connection. |
Extensive design Two screw holes have been reserved at the end of the motor, so you can easily install the LED afterburnner according to your needs. |
For product purchase, use, repair and maintenance issues, you can contact us here
+: 86 769 82 669 669
Mon.~ Fri.(UTC+8)8:30-17:30