|● Standard - Not Included|
|Material||EPO foam & ABS Plastic|
|Wingspan||920mm / 36.22in|
|Length||1050mm / 41.33in|
|Take off weight||1720g / 60.67oz （w/o battery）|
|Top Speed||160KPH / 102MPH|
|EDF / Propeller||70mm 12-Blade EDF|
|Motor||2952-2100KV Inrunner Brushless Motor|
|ESC||60A with 5A UBEC , XT60 Connector|
|Servos||Digital gear Servo 9g ╳ 8pcs|
Electronic retractable landing gear
Skill Level Elementary
Required Radio 6+ Channel
Required Battery 6S 22.2V 3000-4000mAh XT60 Connector
Assembly Way 50% parts fixed by screw 50% parts fixed by glue
Build Time About 1 hours
Aileron/rudder/elevator use the plastic hinges to improve its safety.
The plastic clevis is covered with a silicone tube to effectively prevent loosening.
Use two servos to control left/right flap, it can effectively reduce the landing speed when landing.
In this small 70mm size jet, the main wings are assembled without glue. Other parts are glued together with glue, which effectively reduces costs and weight.
This jet has a large battery compartment space, a maximum of 6S 4000mAh battery can be placed.
Retractable landing gear, with S series 3kgf.cm torque electric retractable controller.