|● Standard ○ Optional - Not Included|
|Material||EPO foam & ABS Plastic|
|Wingspan||1257mm / 49.4in|
|Length||1878mm / 73.9in|
|Take off weight||4300g / 151.6oz （w/o battery）|
|Top Speed||210KPH / 131.25MPH|
|EDF / Propeller||80mm 9-Blade EDF ×2|
|Motor||3658-1920KV Inrunner Motor ×2|
|ESC||100A ×2 with 8A UBEC , EC5 Connector|
Digital matel gear servo 9g ╳ 2pcs
Digital matel gear servo 17g ╳ 7pcs
Electric retractable suspension gear
|Spcial accessories||LED light controller V3|
|3DTV Nozzle Set||○|
Skill Level Intermediate/Advanced
Required Radio 6+ Channel
Required Battery TWO 6S 22.2V 4000~5000mAh LiPo EC5 Connector
Assembly Way Fixed by screw
Build Time About 1 hours
Beautiful decal and painting
We sticked the other decals at factory except the tiger decal on the vertical stabilizer.
Among all electric foam models, this is the first product to be painted with digital camouflage.
Scale navigation lights
11 scale LED navigation lights
controlled by the MFCB control box, very cool
The MFCB control box includes
a constant light and a variety of strobe ports,
you can change the light flashing frequency
according to your needs
Large battery compartment
There are three full-size battery spaces
under the Freewing MiG-29 cockpit.
Easily adapt to the center of gravity
by changing the battery position。
Landing gear and wheels
New #E8613 series electric controller
with super torque (35kgf.cm)
with high-strength internal structure and shell
CNC aluminum shock absorber strut
and decorative plastic parts.
65mm/85mm outer diameter wheel,
can adapt to most grass takeoff
and landing environments
Freewing MiG-29 includes a complete front door and a main landing gear door covering 75% of the area
Assemble main wing
The main wing mounting pin is embedded
with a copper nut for long life
Adopting "non-loosable" design,
the loosened screws will not fall off the main wing
Missile and pylon
It includes 8 scale missiles.
The installation of missiles and pylons
uses the Freewing standard slot structure.
If you have other scale weapons of similar proportions, you can use them freely.
Install horizontal stabilizer
The rotating shaft containing the bearing
effectively reduces the gap.
Metal elevator arm, copper ball head buckle
and transmission carbon tube pushrod
can ensure the transmission precision
as much as possible
For product purchase, use, repair and maintenance issues, you can contact us here
+: 86 769 82 669 669