| ● Standard ○ Optional - Not Included | ||||||||||
|
Material |
EPO foam & ABS Plastic | |||||||||
| Wingspan | 1034mm / 40.7" | |||||||||
| Length | 1500mm / 59.05" | |||||||||
| Take off weight | 2640g / 93.12oz （w/o battery） | |||||||||
| Top Speed | 192KPH / 120MPH (w/o missiles) | |||||||||
| EDF / Propeller | 90mm 12-Blade ducted fan (V2,2023) | |||||||||
| Motor | 3668-1960KV Inrunner Brushless Motor | |||||||||
| ESC | 120A / 8A BEC with EC5 Connector (Thrust reversing ESC) | |||||||||
| Servos |
Digital metal gear servo 9g ╳ 7pcs |
|||||||||
| Landing Gear |
Electronic retractable landing gear with metal shock absorbing struts |
|||||||||
| Cabin door | Front door, Main Landing gear door | |||||||||
| LED lights | Formation lights ╳ 4pcs | |||||||||
| Spcial accessories | Multi-Function Control box E | |||||||||
| Ailerons | ● | |||||||||
| Elevator | ● | |||||||||
| Rudder | ● | |||||||||
| Flap | ● | |||||||||
| Canards | - | |||||||||
| 3DTV Nozzle Set | - | |||||||||
| After-burner | ○ | |||||||||
| Updates | Use #E72216 and 120A ESC (with thrust reverse function) to replace the old #E72213 and 130A ESC E72216(90-12B plastic EDF and 3668-1960KV Inrunner motor) E72213(90-9B plastic EDF and 3672-1900KV Inrunner motor) |
|||||||||
| ● Standard ○ Optional - Not Included | |||||||||
| Models | EDF Fan | Motors | ESC | Servos | Landing gear | Cabin door | Led lights |
Multi-Function Control board |
Gyro |
| PNP | ● | ● | ● | ● | ● | ● | ● | ● | - |
| ARF Plus | - | - | - | ● | ● | ● | ● | ● | - |
Skill Level Intermediate/Advanced
Required Radio 6+ Channel
Required Battery 6S 22.2V 5000~6000mAh LiPo EC5 Connector
Assembly Way Fixed by screw
Build Time About 2 hours
Install
Modular design, the main parts such as main wing, horizontal stabilizer,vertical stabilizer are all installed with screws. Main wing and fuselage are connectted with ribbon wires, convenience to use.
Cabin door
Pre-install the nose/rear landing gear ,controlled by servos.
Flap
New split flap design for better performance and more detail.
Appearance design
The install position of horizontal tail and vertical tail adopts a concealed design for better visual effects.
All control surfaces used the more precise copper ball head buckle and plastic ball head buckle.
LED light
LED lights pre-installed at the factory.
Detail
Refer to the real jet and perfect every detail.
For product purchase, use, repair and maintenance issues, you can contact us here
+: 86 769 82 669 669
Mon.~ Fri.(UTC+8)8:30-17:30
