Freewing F-4D Phantom II 90mm EDF Jet
Specifications FEATURES BUY NOW

PRODUcT SPECIFICATIONS :


● Standard    ○ Optional   - Not Included  

6S PNP
MaterialEPO foam & ABS Plastic
Wingspan1030mm / 40.15in
Length1550mm / 61.02in
Take off weight2850g / 100.53oz (w/o battery)
Top Speed178KPH / 111.25MPH
EDF / Propeller90mm 9-Blade EDF
Motor3672-1900KV Inrunner Brushless Motor
ESC130A with 8A UBEC , EC5 Connector
Servos

Digital metal gear servo 9g ╳ 2pcs
Digital metal gear servo 17g ╳ 5pcs
Digital metal gear servo 30g ╳ 1pcs

Landing Gear

Electronic retractable landing gear with metal shock absorbing struts

Cabin doorFront door, Main Landing gear door
LED lightsYes
Spcial accessoriesMulti-Function Control Box E (MCB-E)
Ailerons
Yes
ElevatorYes
RudderYes
FlapYes
Canards-
3DTV Nozzle Set
Specification parameter introduction
Skill Level 
Advanced/Expert
Specification parameter introduction
Required Radio 
6+ Channel
Specification parameter introduction
Required Battery
6S 22.2V 5000~6000mAh LiPo
EC5 Connector
Specification parameter introduction
Assembly Way
Fixed by screw
Specification parameter introduction
Build Time
About 3 hours

FEATURES :

F-4-D-905

Appearance

Freewing 90mm F-4 Phantom II uses the "Vietnam War" QY-463 forest camouflage.Use environmentally water-based paint, smooth paint surface. Pre-attached the decal at the facotry, it has accurate proportions and rich details.

F-4-D-902

Structure and assembly

Modular design. The main parts such as main wing, horizontal tail, vertical tail (except several smaller foam parts) all use the quick release structure and are fixed with screws.

The main wing electronic equipment and the battery compartment are connected by a ribbon cable. Easy to use and easy to carry.

F-4-D-903

LED light

PNP pre-installed 5pcs 3W LED lights at the factory, they are located at left/right wingtips, vertical tail and nose landing gear.

F-4-D-904

Scale pylons and weapons

PNP/ARF+ package box contains the scale pylons and scale weapons. It is fixed to the lower surface of the main wing by a plastic slide rail, which is convenient to install and disassemble, and is easy to carry and use

F-4-D-907

Battery compartment

F-4 Phontom II has  large  battery compartment space, bring us a relaxed operating experience.

F-4-D-901

Horizontal tail structure

The use of plastic parts, precision aluminum rotating shafts, bearings, and 30g high-torque servo composed of a full-motion horizontal tail rotating set, so that the horizontal tail can effectively, safely and accurately work according to instructions. The overall structure is fixed with screws and is easy to maintain. 

F-4-D-908

Landing gear & cabin door

15kgf.cm torque L series landing gear retractable controller, strong torsion force, can easily retract and open the landing gear.The aluminum CNC shock-absorbing landing gear main struts have reliable structure. The nose cabin door controlled by servo, and unilateral follow-up door of rear landing gear, are closed during flight, which can effectively reduce the wind resistance.

F-4-D-909

Power system

New #E72213 90mm 9B inrunner power system,higher efficiency and lighter weight bring more thrust to our products, also it effectively guarantees a certain endurance time.

F-4-D-906

Flap & control surface structure

Uses 2 servos to control the left and right flaps respectively. The gap-less plastic hinge structure ensures the appearance while taking into account the safety and reliability of use. Through the pushrod, the ball buckle, and the metal ball, the control surface is precisely controlled.


understand more

For product purchase, use, repair and maintenance issues, you can contact us here

Service Hotline
CALL US NOW

+: 86 769 82 669 669

service hours
WORKING TIME

Mon.~ Fri.(UTC+8)8:30-17:30

Spec Features Support Spare parts More